|
The following is a list of standards that are relevant to the field of machinery safety. Not all are applicable in every case, and there are specific 'Type C' standards that will be relevant to defined machinery types, but which are excluded from this list for reasons of clarity. A search of the BSI web site should help to track down any of these.
In addition to current standards, the list below includes Published Documents and those standards that have been published in the form of a Draft for Public Comment. While these do not carry the same weight as Current standards, they may prove to be of value to organisations striving to deliver best practice.
Note that some standards are available in kits, the cost of which represents a substantial saving compared with the cost of buying all of the standards individually. These kitted standards are listed at the end.
If several standards are to be purchased, it could be worth becoming a Member of BSI to take advantage of the 50% discount that is available. Otherwise, be aware that standards can also be purchased from Official Distributors such as Pilz.
Current standards
BS EN 620:2002 Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials
BS 4531:1986 Specification for portable and mobile troughed belt conveyors
BS 7300:1990 Code of practice for safeguarding of the hazard points on troughed belt conveyors
BS 5667-1:1979 (ISO 1819-1977) Specification for continuous mechanical handling equipment - safety requirements. General
BS 5667-11:1979 (ISO 5037-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts
BS 5667-12:1979 (ISO 5038-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts
BS 5667-14:1979 (ISO 5040-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: live roller conveyors (with positive or friction drive)
BS 5667-15:1979 (ISO 5041-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: crate-carrying chain conveyors having biplanar chains for flat-bottomed unit loads
BS 5667-16:1979 (ISO 5042-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: slat band chain conveyors
BS 5667-17:1979 (ISO 5043-1977) Specification for continuous mechanical handling equipment - safety requirements. Unit loads: continuous plate conveyors (horizontal)
BS 5667-18:1979 Specification for continuous mechanical handling equipment - safety requirements. Conveyors and elevators with chain-elements - examples for guarding of nip points
BS 5667-19:1980 Specification for continuous mechanical handling equipment - safety requirements. Belt conveyors - examples for guarding of nip points
BS EN ISO 12100-1:2003 Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology
BS EN ISO 12100-2:2003 Safety of machinery. Basic concepts, general principles for design. Technical principles
BS EN ISO 13849-2:2003 Safety of machinery. Safety-related parts of control systems. Validation
BS EN ISO 14122-1:2001 Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels
BS EN ISO 14122-2:2001 Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
BS EN ISO 14122-3:2001 Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails
BS IEC 61496-2:1997 Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs) Status: Current, Work In Hand
BS EN 294:1992 Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
BS EN 349:1993 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
BS EN 418:1992 Safety of machinery. Emergency stop equipment, functional aspects. Principles for design
BS EN 457:1992 Safety of machinery. Auditory danger signals. General requirements, design and testing
BS EN 563:1994 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
BS EN 574:1997 Safety of machinery. Two-hand control devices. Functional aspects. Principles for design
BS EN 614-1:1995 Safety of machinery. Ergonomic design principles. Terminology and general principles Status: Current, Work In Hand
BS EN 614-2:2000 Safety of machinery. Ergonomic design principles. Interactions between the design of machinery and work tasks
BS EN 626-1:1995 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Principles and specifications for machinery manufacturers
BS EN 626-2:1996 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Methodology leading to verification procedures
BS EN 811:1997 Safety of machinery. Safety distances to prevent danger zones being reached by the lower limbs
BS EN 842:1996 Safety of machinery. Visual danger signals. General requirements, design and testing
BS EN 894-1:1997 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. General principles for human interactions with displays and control actuators Status: Current, Work In Hand
BS EN 894-2:1997 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Displays Status: Current, Work In Hand
BS EN 894-3:2000 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Control actuators
BS EN 953:1998 Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems. General principles for design
BS EN 981:1997 Safety of machinery. System of auditory and visual danger and information signals
BS EN 982:1996 Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
BS EN 983:1996 Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
BS EN 999:1999 Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN 1005-1:2001 Safety of machinery. Human physical performance. Terms and definitions
BS EN 1005-2:2003 Safety of machinery. Human physical performance. Manual handling of machinery and component parts of machinery
BS EN 1005-3:2002 Safety of machinery. Human physical performance. Recommended force limits for machinery operation
BS EN 1037:1996 Safety of machinery. Prevention of unexpected start-up
BS EN 1050:1997 Safety of machinery. Principles for risk assessment
BS EN 1070:1998 Safety of machinery. Terminology
BS EN 1088:1996 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection.
BS EN 1760-1:1998 Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
BS EN 1760-2:2001 Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
BS EN 1837:1999 Safety of machinery. Integral lighting of machines
BS EN 12198-1:2000 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. General principles
BS EN 12198-2:2002 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Radiation emission measurement procedure
BS EN 12198-3:2002 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Reduction of radiation by attenuation or screening
BS EN 12626:1997 Safety of machinery. Laser processing machines. Safety requirements Status: Current, Work In Hand
BS EN 13861:2002 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 60204-1:1998, IEC 60204-1:1997 Safety of machinery. Electrical equipment of machines. General requirements Status: Current, Work In Hand
BS EN 60204-11:2001, IEC 60204-11:2000 Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
BS EN 61310-1:1995, IEC 61310-1:1995 Safety of machinery. Indication, marking and actuation. Requirements for visual, auditory and tactile signals
BS EN 61310-2:1995, IEC 61310-2:1995 Safety of machinery. Indication, marking and actuation. Requirements for marking
BS EN 61310-3:1999, IEC 61310-3:1999 Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators
BS EN 61496-1:1998, IEC 61496-1:1997 Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
BS EN 61496-3:2001, IEC 61496-3:2001 Safety of machinery. Electro-sensitive protective equipment. Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
BS 6753:1986 Specification for shotbolts (solenoid operated) for guarding machinery Status: Current, Confirmed
Published Documents
PD 5304:2000 Safe use of machinery Status: Current
PD CR 954-100:1999 Safety of machinery. Safety-related parts of control systems. Guide on the use and application of EN 954-1:1996 Status: Current
Drafts for Public Comment
95/700126 DC Food processing machinery. Safety and hygiene requirements. Basic concepts. Part 1. Safety requirements. (prEN 1672-1) Status: Current, Draft for Public Comment
01/702212 DC ISO 11553. Safety of machinery. Laser processing machines. Safety requirements Status: Current, Draft for Public Comment
02/203840 DC IEC 60204-1. Ed.5.0. Safety of machinery. Electrical equipment of machines. Part 1: General requirements Status: Current, Draft for Public Comment
02/205333 DC BS IEC 62061. Safety of machinery. Functional safety of electrical, electronic and programmable control systems for machinery Status: Current, Draft for Public Comment
02/709474 DC BS EN 1760-3. Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices Status: Current, Draft for Public Comment
03/309922 DC CENELEC TS 61496-2. Safety of machinery. Electro-sensitive protective equipment. Part 2. Particular requirements for equipment using active opto-electronic protective devices (AOPD) Status: Current, Draft for Public Comment
03/311615 DC CENELEC TS 50418. Safety of machinery. Electro-sensitive protective equipment. Passive infra-red protective devices (PIPDs) Status: Current, Draft for Public Comment
Kitted standards
KIT 8 Safety of machinery pack Includes BS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 294, BS EN 349, BS EN 418, BS EN 811, BS EN 953, BS EN 1050, BS EN 60204-1, PD 5304 and TH 42073
KIT 89 Safety of machinery. Electrotechnical Includes BS EN 61310-1, BS EN 61310-2, BS EN 61310-3, BS EN 60204-1, BS EN 60204-11, BS EN 60204-31, BS EN 60204-32, BS EN 61496-1, BS EN 61496-3, PD CLC/TR 50404 and BS IEC 61496-2
KIT 92 Safety of machinery. Permanent means of access to machinery Includes parts 1 to 3 of BS EN ISO 14122
|
